Construction chemistry
ELKAY epoGRANIT 1:1 RATIO is a a multi-purpose, epoxy based, non-sag paste form, beige color, structural adhesive with 1:1mixing ratio.
Suitable for bonding, filling, repairing, reinforcing applications and metal anchorage installations that requires high bonding strength and bearing capacity.
Can be used to install grouting bolts and metal into concrete and masonry based materials.
Usable for grouting horizontal cracks in structural concrete and wood by gravity feed.
It is easy to use.
Non-sag on vertical or overhead surface.
It has excellent chemical resistance.
Can be used for building reinforcement in earthquake areas.
<strong>Usage areas: </strong>
Granit - Marble - Natural Stones - Quartz Solid Surface - Composite Materials - Bricks - Ceramics - Metal - Sintered Porcelaine
<strong>Product usage: </strong>
Grind the surface to be glued with hard grinding paper and remove any dust, moisture and oil from the surface. The surface to be treated must be clean and completely dry.
Take required amount of stone glue (A) and mix it with hardener paste (B) until a homogeneous shade of color is achieved with 1A:1B mixing ratio . Close the cap of unused part of the adhesive immediately.
In 45-55 minutes it will be set. Hardening process is accelerated by heat and delayed by cold.
https://youtu.be/Yj2vK1-uA_E
SKU EG 2001
Available: instock
€14,96 excl VAT
€18,70 incl VAT
€18,70 incl VAT
ELKAY GRANIT COLORED Marble and Stone Adhesive is a two component polyester adhesive for marble, travertine, granite, ceramic, brick and other similar materials.
It is used for gluing, repairing and filling up porous surfaces.
Has rapid cure time (3-5 mins at 25 °C).
Provides excellent brightness after grinding and polishing process.
It is suitable for horizontal and vertical applications.
No color change, cracking or shrinkage during hardening period.<!--more-->
<strong>Usage areas:</strong> Natural Stone - Marble - Granit - Travertine - Ceramic - Brick - Similar Materials
<strong>Product usage:</strong>
Grind the surface to be glued with hard grinding paper and remove any dust, moisture and oil from the surface. The surface to be treated must be clean and completely dry.
Take required amount of stone glue and mix it with hardener paste at 2-3% of volume. Close the cap of unused part of the adhesive immediately.
In 3-5 minutes it will be set..
https://youtu.be/Lwbd7hdD_UI
SKU EB 25
Available: instock
€4,96 excl VAT
€6,20 incl VAT
€6,20 incl VAT
ELKAY GRANIT COLORED Marble and Stone Adhesive is a two component polyester adhesive for marble, travertine, granite, ceramic, brick and other similar materials.
It is used for gluing, repairing and filling up porous surfaces.
Has rapid cure time (3-5 mins at 25 °C).
Provides excellent brightness after grinding and polishing process.
It is suitable for horizontal and vertical applications.
No color change, cracking or shrinkage during hardening period.<!--more-->
<strong>Usage areas:</strong> Natural Stone - Marble - Granit - Travertine - Ceramic - Brick - Similar Materials
<strong>Product usage:</strong>
Grind the surface to be glued with hard grinding paper and remove any dust, moisture and oil from the surface. The surface to be treated must be clean and completely dry.
Take required amount of stone glue and mix it with hardener paste at 2-3% of volume. Close the cap of unused part of the adhesive immediately.
In 3-5 minutes it will be set..
https://youtu.be/Lwbd7hdD_UI
SKU EB 25-1
Available: instock
€5,40 excl VAT
€6,75 incl VAT
€6,75 incl VAT
ELKAY GRANIT TRANSPARENT marble and stone adhesive is a two component transparent polyester adhesive for marble, travertine, granite, ceramic, brick and other similar materials.
It is used for gluing, repairing and filling up porous surfaces.
Has rapid cure time (5-7 mins at 25°C).
With its extra transparency, provides great harmony with the surface colour.
Provides excellent brightness after the grinding and polishing process.
It is suitable for horizontal and vertical applications.
No color change, cracking or shrinkage during hardening period.
<strong>Product usage:</strong>
<div class="ewa-rteLine">Grind the surface to be glued with hard grinding paper and remove any dust, moisture and oil from the surface. The surface to be treated must be clean and completely dry.</div>
<div class="ewa-rteLine"></div>
<div class="ewa-rteLine">Take required amount of stone glue and mix it with hardener paste at 2-3% of volume. Close the cap of unused part of the adhesive immediately.</div>
<div class="ewa-rteLine"></div>
<div class="ewa-rteLine">In 5-7 minutes it will be set.</div>
<div><strong>Usage areas:</strong></div>
<div>Natural Stone - Marble - Granit - Travertine - Ceramic - Brick - Smilar Material</div>
<div></div>
<div></div>
<div></div>
https://youtu.be/iDpI8btRDoY
SKU EB 30-1
Available: instock
€9,65 excl VAT
€12,06 incl VAT
€12,06 incl VAT
ELKAY GRANIT COLOREX coloring pastes are universal colour pastes for polyester mastics, resins and epoxy systems.
It has wide color options.
It is easy to mix.
It provides universal coloring.
<strong>Product usage:</strong>
Add EB50 (from %2-3) to main component to reach the desired hue.
Different colors can be used to achieve desired hue.
Mix well to make an uniform color.
Then mix the main component with hardener as described on its label.
<strong>Usage areas:</strong>
Marble - Granite - Travertine - Natural Stones
SKU EB 50 BLACK
Available: instock
€3,12 excl VAT
€3,90 incl VAT
€3,90 incl VAT
ELKAY GRANIT COLOREX coloring pastes are universal colour pastes for polyester mastics, resins and epoxy systems.
It has wide color options.
It is easy to mix.
It provides universal coloring.
<strong>Product usage:</strong>
Add EB50 (from %2-3) to main component to reach the desired hue.
Different colors can be used to achieve desired hue.
Mix well to make an uniform color.
Then mix the main component with hardener as described on its label.
<strong>Usage areas:</strong>
Marble - Granite - Travertine - Natural Stones
SKU EB 50 WHITE
Available: instock
€3,12 excl VAT
€3,90 incl VAT
€3,90 incl VAT
ELKAY GRANIT FAST ADHESIVE is a two component cyanoacrylate based adhesive set for bonding wide range of materials within seconds.
It is especially suitable for the applications where cure speed needs to be accelerated.
It is suited to bonding difficult substrates which have porous or uneven nature.
It increases bonding strength by preventing the adhesive to be absorbed by the surface.
It has high bonding strength without making a mess.
Suitable for use on vertical surfaces as it will not drip or slump.
<strong>Product usage:</strong>
Grind the surface to be glued with hard grinding paper and remove any dust, moisture and oil from the surface. The surface to be treated must be clean, completely dry and free of dust and grease.
Spray the activator to the other surface and allow evaporating.
Apply enough adhesive to the other surface
Join substrates and press firmly for one minute. It will be set within seconds.
<strong>Usage areas:</strong>
Natural Stone - Marble - Granite - Rubber - Wood - MDF - Metal
https://youtu.be/d_rxbhmmaQc
SKU FA 40
Available: instock
€2,80 excl VAT
€3,50 incl VAT
€3,50 incl VAT
ELKAY GRANIT COLORED Marble and Stone Adhesive is a two component polyester adhesive for marble, travertine, granite, ceramic, brick and other similar materials.
It is used for gluing, repairing and filling up porous surfaces.
Has rapid cure time (3-5 mins at 25 °C).
Provides excellent brightness after grinding and polishing process.
It is suitable for horizontal and vertical applications.
No color change, cracking or shrinkage during hardening period.<!--more-->
<strong>Usage areas:</strong> Natural Stone - Marble - Granit - Travertine - Ceramic - Brick - Similar Materials
<strong>Product usage:</strong>
Grind the surface to be glued with hard grinding paper and remove any dust, moisture and oil from the surface. The surface to be treated must be clean and completely dry.
Take required amount of stone glue and mix it with hardener paste at 2-3% of volume. Close the cap of unused part of the adhesive immediately.
In 3-5 minutes it will be set..
https://youtu.be/Lwbd7hdD_UI
SKU EB 25-2
Available: instock
€5,40 excl VAT
€6,75 incl VAT
€6,75 incl VAT
ELKAY GRANIT HIGHTACK is eco friendly one component, high quality professional adhesive with an extremely high initial tack based on hybrid polymer technology.
It cures with ambient humidity to form a durable elastic rubber.
Extremely high initial tack.
No mechanical support required during curing.
High mechanical resistance and strength.
Free of isocyanates, solvents and silicones.
No shrinkage and bubble free.
Paintable and adheres perfectly without primer on surfaces.
<strong>Usage areas:</strong>
All types of Natural & Synthetic Stones - Concrete - Glass - PVC- Ceramic - Metal - Steel - Wood
<strong>Product usage:</strong>
Cut the tip of the cartridges according to the width of the surface and put the product into to the cartridge gun.
Apply the adhesive in strips or dots to the base or on the element to be bonded in vertical rows.
Bring together the parts to be joined as quickly as possible. Hold glued parts still until the curing finalizes.
Curing time may varies based on the temperature and relative humidity level.
https://youtu.be/FJueOs0yfXo
SKU HT 280
Available: instock
€5,00 excl VAT
€6,25 incl VAT
€6,25 incl VAT
ELKAY GRANIT PREMIUM NEUTRAL SILICONE SEALANT, is a neutral cure premium performance silicone sealant designed for weather sealing and glazing applications where acetoxy silicone is not desired.
It can adhere to many surfaces without a primer.
It is resistant to fungus and mold for a long time.
It is resistant to UV rays and weather conditions.
Less odor & Non-corrosive.
It has high elasticity and flexibility.
Can be used for sealing windows, doors; DIY applications; bathroom, kitchen and plumbing applications; Connection and expansion of joints on glass, porcelain, steel etc.
<strong>Usage areas:</strong>
Walls - Brick - Concrete - PVC - Wood - Glass - Ceramic - Mirror - Marble - Granite
<strong>Product usage:</strong>
Application surfaces must be sufficiently free of dirt, oil and dust.
Open the cartridge by cutting the top and screw on the nazzle.
Cut off the tip of nozzle. Take off the aluminum cover at the bottom of the cartridge.
Insert cartridge in gun and apply.
After the application, the sealant must be tooled with light pressure to spread the material against the joint surfaces and to obtain a professional finish.
Excess uncured sealant may be cleaned with solvent and cured sealant may be cleaned mechanically.
https://youtu.be/ZnBYA2ISzCk
SKU SLCN 280
Available: instock
€4,52 excl VAT
€5,65 incl VAT
€5,65 incl VAT
ELKAY GRANIT POLIEPOXY is a 2-component polyester and epoxy based chemical anchoring system.
It is easy to use.
It can be applied on concrete, solid brick, perforated brick, briquette, natural stone, granite and rock.
It is suitable for thixotropic, vertical and horizontal anchoring applications.
It is resistant to heat and chemicals up to 80 degrees.
It shows high strength thanks to its reinforced formula.
<strong>Product usage:</strong>
Elkay GRANIT Chemical Anchor is a "ready to use" product and the correct application is as follows;
Drill a hole.
Clean the hole with a stiff wire or nylon brush and air.
Remove the screw cap from the cartridge.
Attach the mixer nozzle.
Place it in applicator gun and dispense the first part of the cartridge until an even color is achieved.
Place the tip of the mixer in the hole and fill the hole halfway.
Immediately insert the fixing screw with twisting motion.
Leave the fixing undisturbed until loading time has achieved.
<strong>Usage areas:</strong>
Metal-Metal Concrete-Aerated Concrete-Perforated Brick-Marble-Granite
https://youtu.be/HYAO9p_OeuQ?list=PLHIBICcWYbQ26YwuCDTCA0pmeT0f9dhQR
SKU PL 5000
Available: instock
€4,80 excl VAT
€6,00 incl VAT
€6,00 incl VAT
ELKAY GRANIT POLYURETHANE FOAM is a single component moisture curing and self expanding polyurethane foam.
It is designed for fixing and insulating of door and window frames; filling and sealing of gaps, joints and cavities; filling of penetrations in walls; insulating electrical outlets and water pipes.
It does not contain any propellant gases that are harmful to the ozone layer.
It provides excellent adhesion and filling capacity with high thermal & acoustical insulation.
Adheres almost all building materials with exception of surfaces such as polyethylene, teflon, silicone and surfaces contaminated with oils, mold release agents etc.
It is mould and water proof.
<strong>Usage areas:</strong>
All types of Natural & Synthetic Stones - Rubber - Wood - MDF - Metal
<strong>Product usage:</strong>
Shake the can well before use.
Insert the straw into the valve.
Use the foam by pressing the valve with the box upside down.
Since the foam will expand, the gaps should be partially filled.
https://youtu.be/4tYUkmQAR6c
SKU PU 750
Available: instock
€4,12 excl VAT
€5,15 incl VAT
€5,15 incl VAT