Građevinska kemija
ELKAY GRANIT UNIVERSAL SILICONE SEALANT is a acetoxy cure silicone sealant for a range of sealing and glazing applications.
It provides strong adhesion.
Stays permanently elastic after curing.
Resistant to extreme temperatures, aging and discoloring.
It is suitable for common non-porous building materials.
Can be used for sealing around windows, doors; DIY applications; bathroom, kitchen and plumbing applications; Connection and expansion of joints on glass, porcelain, steel etc.
<strong>Usage areas:</strong>
Walls-Brick-Concrete-PVC-Wood-Glass-Ceramic-Mirror-Marble-Granite
<strong>Product usage:</strong>
Application surfaces must be sufficiently free of dirt, oil and dust.
Open the cartridge by cutting the top and screw on the nazzle.
Cut off the tip of nozzle. Take off the aluminum cover at the bottom of the cartridge.
Insert cartridge in gun and apply.
After the application, the sealant must be tooled with light pressure to spread the material against the joint surfaces and to obtain a professional finish.
Excess uncured sealant may be cleaned with solvent and cured sealant may be cleaned mechanically.
https://youtu.be/ZnBYA2ISzCk
Šifra: SLCA 280
Dostupnost: Na zalihi
€4,00 bez PDV-a
€5,00 s PDV-om
€5,00 s PDV-om
ELKAY GRANIT COLORED Marble and Stone Adhesive is a two component polyester adhesive for marble, travertine, granite, ceramic, brick and other similar materials.
It is used for gluing, repairing and filling up porous surfaces.
Has rapid cure time (3-5 mins at 25 °C).
Provides excellent brightness after grinding and polishing process.
It is suitable for horizontal and vertical applications.
No color change, cracking or shrinkage during hardening period.<!--more-->
<strong>Usage areas:</strong> Natural Stone - Marble - Granit - Travertine - Ceramic - Brick - Similar Materials
<strong>Product usage:</strong>
Grind the surface to be glued with hard grinding paper and remove any dust, moisture and oil from the surface. The surface to be treated must be clean and completely dry.
Take required amount of stone glue and mix it with hardener paste at 2-3% of volume. Close the cap of unused part of the adhesive immediately.
In 3-5 minutes it will be set..
https://youtu.be/Lwbd7hdD_UI
Šifra: EB 25-2-1
Dostupnost: Na zalihi
€6,30 bez PDV-a
€7,88 s PDV-om
€7,88 s PDV-om
ELKAY MAXICOLOR is a solvent based color enhancing sealer with oil and water repellent agents.
It enhances the color of the stone.
It creates an invisible barrier on the applied surface while allowing surface to breathe.
It hampers the absorption of common watery and oily stains.
It provides easy cleaning and facilitates daily maintenance.
Thanks to its high UV resistance, it prevents color fading caused by the sun on the surface.
It eliminates superficial hairline cracks.
<strong>Usage areas:</strong>
Natural Stone - Brick - Terracotta - Tile Mosaic - Cement Based Surfaces
<strong>Product usage:</strong>
Elkay MAXICOLOR is a "ready to use" sealer and steps for correct usage are as follows;
The surface on which the product will be applied must be dry and free of any absorbant varnish.
Apply 1 coat of the product liberally to the surface with a brush or roller.
Wait for the stone to absorb.
After the product is well absorbed by the stone, apply the second coat.
After applying the second coat,, rub the material onto the stone with the help of dry clean cloth, so that the material does not leave any stain on the surface.
To prolong the life of the protection, it is highly recommended to repeat once every 2 years as a single coat.
https://youtu.be/thdoDRiBpxE?list=PLHIBICcWYbQ26YwuCDTCA0pmeT0f9dhQR
Šifra: VH 2010
Dostupnost: Na zalihi
€34,90 bez PDV-a
€43,63 s PDV-om
€43,63 s PDV-om
ELKAY MAXISEAL is a solvent based natural look deep penetrating sealer with oil and water repellent agents.
It does not alter original colour and appearance.
It creates an invisible barrier on the applied surface while allowing the surface to breathe.
It hampers the absorption of common watery and oily stains.
It provides easy cleaning and facilitates daily maintenance.
Offers long lasting, renewable protection.
Thanks to its high UV resistance, it prevents color fading caused and yellowing.
It protects the surface against moss, mold and efflorescence.
<strong>Usage areas:</strong>
Natural Stone – Brick – Terracotta – Tile – Mosaic – Cement Based Surfaces
<strong>Product usage:</strong>
Elkay MAXISEAL is a "ready to use" sealer and steps for correct usage are as follows;
The surface on which the product will be applied must be dry and free of any absorbant varnish.
Apply 1 coat of the product liberally to the surface with a brush or roller.
Wait for the stone to absorb.
After the product is well absorbed by the stone, apply the second coat.
Rub the material on the stone with the help of dry clean cloth, so that the material does not leave any stain on the surface.
To prolong the life of the protection, it is highly recommended to repeat once every 2 years as a single coat.
https://youtu.be/4jvX2QA68Rk?list=PLHIBICcWYbQ26YwuCDTCA0pmeT0f9dhQR
Šifra: VH 72
Dostupnost: Na zalihi
€37,50 bez PDV-a
€46,88 s PDV-om
€46,88 s PDV-om
ELKAY THOR HYBRID epoxy acrylate based, super transparent adhesive specially formulated for gluing and repairing surfaces of large composite & Porcelain Tiles & Techno Ceramic tiles, natural stones, solid/ sintered surfaces and similar materials when thin and strong adhesion is needed.
It is used for gluing and repairing.
Has rapid cure time (5-7 mins at 25 °C).
Provides excellent brightness after grinding and polishing process.
It is suitable for horizontal and vertical applications.
No color change, cracking or shrinkage during hardening period.
It has cutting edge technology that provides high performance in a short time.
Due to its superior clarity it adapts to all stone colors.
It has resistance to high pressure.
It has high performance even at higher and lower temperatures.<!--more-->
<strong>Product usage:</strong>
<div class="ewa-rteLine">Grind the surface to be glued with hard grinding paper and remove any dust, moisture and oil from the surface. The surface to be treated must be clean and completely dry.</div>
<div class="ewa-rteLine"></div>
<div class="ewa-rteLine">Take required amount of stone glue and mix it with hardener paste at 1-2% of volume. Close the cap of unused part of the adhesive immediately.</div>
<div class="ewa-rteLine"></div>
<div class="ewa-rteLine">In 5-7 minutes it will be set.</div>
<div></div>
<div><strong>Usage areas:</strong></div>
<div></div>
<div>Natural Stone- Quartz-Ceramic-Porcelain.</div>
<div></div>
<div></div>
https://youtu.be/ogkB1MSPqt0
Šifra: EB 45H
Dostupnost: Na zalihi
€33,76 bez PDV-a
€42,20 s PDV-om
€42,20 s PDV-om
ELKAY WATERSTOP is a solvent based natural look water repellent sealer.
It does not alter original colour and appearance.
It hampers absorption of common water and watery stains.
Offers long lasting, renewable protection.
Provides easy cleaning and daily maintenance.
Thanks to its high UV resistance, it prevents color fading caused and yellowing.
It protects the surface against moss, mold and efflorescence.
<strong>Usage areas:</strong>
Natural Stones - Brick - Terracota - Mosaic Tile - Cement Based Surfaces
<strong>Product usage:</strong>
Elkay WATERSTOP is a "ready to use" sealer and steps for correct usage are as follows;
The surface on which the product will be applied must be dry and free of any absorbant varnish.
Apply 1 coat of the product liberally to the surface with a brush or roller.
Wait minimum 30 mins for the stone to absorb.
After the product is well absorbed by the stone, apply the second coat.(For high absorbent stones, 3 coats maybe be required.)
Rub the material on the stone with the help of dry clean cloth, so that the material does not leave any stain on the surface.
To prolong the life of the protection, it is highly recommended to repeat once every 2 years as a single coat.
https://youtu.be/v2f2Yftld0Y?list=PLHIBICcWYbQ26YwuCDTCA0pmeT0f9dhQR
Šifra: A 15
Dostupnost: Na zalihi
€33,35 bez PDV-a
€41,69 s PDV-om
€41,69 s PDV-om