Shop
Materijal: Čelik, Površinska obrada: Prirodna, š: 50, v: 110
€0,90 incl VAT
Material: Steel, Spear height: To 130mm
€1,40 incl VAT
Material: Stainless steel AISI 304, Surface finish: Satined, Glass t: 8-12, Glass hole: Yes
€76,25 incl VAT
Material: Stainless steel AISI 304, Surface finish: Satined, Glass t: 8-12, Glass hole: Yes
€75,00 incl VAT
ELKAY GRANIT COLORED ljepilo za mramor i kamen je dvokomponentno poliestersko ljepilo za mramor, travertin, granit, keramiku, ciglu i druge slične materijale.
Koristi se za lijepljenje, popravak i zapunjavanje poroznih površina.
Brzo se stvrdnjava (3-5 minuta na 25 °C).
Pruža izvrstan sjaj nakon brušenja i poliranja.
Pogodan je za horizontalne i vertikalne primjene.
Nema promjene boje, pucanja ili skupljanja tijekom perioda stvrdnjavanja.
Područja upotrebe: Prirodni kamen – Mramor – Granit – Travertin – Keramika – Opeka – Slični materijali
Upotreba proizvoda:
Površinu koju treba lijepiti izbrusite tvrdim brusnim papirom i uklonite prašinu, vlagu i ulje s površine. Površina koju treba tretirati mora biti čista i potpuno suha.
Uzmite potrebnu količinu ljepila za kamen i pomiješajte je s pastom za učvršćivanje u omjeru 2-3% volumena. Odmah zatvorite čep neiskorištenog dijela ljepila.
Za 3-5 minuta bit će postavljeno..
€6,20 incl VAT
ELKAY GRANIT COLORED Marble and Stone Adhesive is a two component polyester adhesive for marble, travertine, granite, ceramic, brick and other similar materials.
It is used for gluing, repairing and filling up porous surfaces.
Has rapid cure time (3-5 mins at 25 °C).
Provides excellent brightness after grinding and polishing process.
It is suitable for horizontal and vertical applications.
No color change, cracking or shrinkage during hardening period.
Usage areas: Natural Stone – Marble – Granit – Travertine – Ceramic – Brick – Similar Materials
Product usage:
Grind the surface to be glued with hard grinding paper and remove any dust, moisture and oil from the surface. The surface to be treated must be clean and completely dry.
Take required amount of stone glue and mix it with hardener paste at 2-3% of volume. Close the cap of unused part of the adhesive immediately.
In 3-5 minutes it will be set..
€6,75 incl VAT
ELKAY GRANIT TRANSPARENT marble and stone adhesive is a two component transparent polyester adhesive for marble, travertine, granite, ceramic, brick and other similar materials.
It is used for gluing, repairing and filling up porous surfaces.
Has rapid cure time (5-7 mins at 25°C).
With its extra transparency, provides great harmony with the surface colour.
Provides excellent brightness after the grinding and polishing process.
It is suitable for horizontal and vertical applications.
No color change, cracking or shrinkage during hardening period.
Product usage:
€12,06 incl VAT
ELKAY GRANIT COLOREX coloring pastes are universal colour pastes for polyester mastics, resins and epoxy systems.
It has wide color options.
It is easy to mix.
It provides universal coloring.
Product usage:
Add EB50 (from %2-3) to main component to reach the desired hue.
Different colors can be used to achieve desired hue.
Mix well to make an uniform color.
Then mix the main component with hardener as described on its label.
Usage areas:
Marble – Granite – Travertine – Natural Stones
€3,90 incl VAT
ELKAY GRANIT COLOREX coloring pastes are universal colour pastes for polyester mastics, resins and epoxy systems.
It has wide color options.
It is easy to mix.
It provides universal coloring.
Product usage:
Add EB50 (from %2-3) to main component to reach the desired hue.
Different colors can be used to achieve desired hue.
Mix well to make an uniform color.
Then mix the main component with hardener as described on its label.
Usage areas:
Marble – Granite – Travertine – Natural Stones
€3,90 incl VAT
ELKAY GRANIT FAST ADHESIVE is a two component cyanoacrylate based adhesive set for bonding wide range of materials within seconds.
It is especially suitable for the applications where cure speed needs to be accelerated.
It is suited to bonding difficult substrates which have porous or uneven nature.
It increases bonding strength by preventing the adhesive to be absorbed by the surface.
It has high bonding strength without making a mess.
Suitable for use on vertical surfaces as it will not drip or slump.
Product usage:
Grind the surface to be glued with hard grinding paper and remove any dust, moisture and oil from the surface. The surface to be treated must be clean, completely dry and free of dust and grease.
Spray the activator to the other surface and allow evaporating.
Apply enough adhesive to the other surface
Join substrates and press firmly for one minute. It will be set within seconds.
Usage areas:
Natural Stone – Marble – Granite – Rubber – Wood – MDF – Metal
€3,50 incl VAT
ELKAY GRANIT COLORED Marble and Stone Adhesive is a two component polyester adhesive for marble, travertine, granite, ceramic, brick and other similar materials.
It is used for gluing, repairing and filling up porous surfaces.
Has rapid cure time (3-5 mins at 25 °C).
Provides excellent brightness after grinding and polishing process.
It is suitable for horizontal and vertical applications.
No color change, cracking or shrinkage during hardening period.
Usage areas: Natural Stone – Marble – Granit – Travertine – Ceramic – Brick – Similar Materials
Product usage:
Grind the surface to be glued with hard grinding paper and remove any dust, moisture and oil from the surface. The surface to be treated must be clean and completely dry.
Take required amount of stone glue and mix it with hardener paste at 2-3% of volume. Close the cap of unused part of the adhesive immediately.
In 3-5 minutes it will be set..
€6,75 incl VAT
ELKAY GRANIT HIGHTACK is eco friendly one component, high quality professional adhesive with an extremely high initial tack based on hybrid polymer technology.
It cures with ambient humidity to form a durable elastic rubber.
Extremely high initial tack.
No mechanical support required during curing.
High mechanical resistance and strength.
Free of isocyanates, solvents and silicones.
No shrinkage and bubble free.
Paintable and adheres perfectly without primer on surfaces.
Usage areas:
All types of Natural & Synthetic Stones – Concrete – Glass – PVC- Ceramic – Metal – Steel – Wood
Product usage:
Cut the tip of the cartridges according to the width of the surface and put the product into to the cartridge gun.
Apply the adhesive in strips or dots to the base or on the element to be bonded in vertical rows.
Bring together the parts to be joined as quickly as possible. Hold glued parts still until the curing finalizes.
Curing time may varies based on the temperature and relative humidity level.
€6,25 incl VAT