Sealers

ELKAY MAXISEAL is a solvent based natural look deep penetrating sealer with oil and water repellent agents. It does not alter original colour and appearance. It creates an invisible barrier on the applied surface while allowing the surface to breathe. It hampers the absorption of common watery and oily stains. It provides easy cleaning and facilitates daily maintenance. Offers long lasting, renewable protection. Thanks to its high UV resistance, it prevents color fading caused and yellowing. It protects the surface against moss, mold and efflorescence. <strong>Usage areas:</strong> Natural Stone – Brick – Terracotta – Tile – Mosaic – Cement Based Surfaces <strong>Product usage:</strong> Elkay MAXISEAL is a "ready to use" sealer and steps for correct usage are as follows; The surface on which the product will be applied must be dry and free of any absorbant varnish. Apply 1 coat of the product liberally to the surface with a brush or roller. Wait for the stone to absorb. After the product is well absorbed by the stone, apply the second coat. Rub the material on the stone with the help of dry clean cloth, so that the material does not leave any stain on the surface. To prolong the life of the protection, it is highly recommended to repeat once every 2 years as a single coat.   https://youtu.be/4jvX2QA68Rk?list=PLHIBICcWYbQ26YwuCDTCA0pmeT0f9dhQR

ELKAY WATERSTOP is a solvent based natural look water repellent sealer. It does not alter original colour and appearance. It hampers absorption of common water and watery stains. Offers long lasting, renewable protection. Provides easy cleaning and daily maintenance. Thanks to its high UV resistance, it prevents color fading caused and yellowing. It protects the surface against moss, mold and efflorescence. <strong>Usage areas:</strong> Natural Stones - Brick - Terracota - Mosaic Tile - Cement Based Surfaces <strong>Product usage:</strong> Elkay WATERSTOP is a "ready to use" sealer and steps for correct usage are as follows; The surface on which the product will be applied must be dry and free of any absorbant varnish. Apply 1 coat of the product liberally to the surface with a brush or roller. Wait minimum 30 mins for the stone to absorb. After the product is well absorbed by the stone, apply the second coat.(For high absorbent stones, 3 coats maybe be required.) Rub the material on the stone with the help of dry clean cloth, so that the material does not leave any stain on the surface. To prolong the life of the protection, it is highly recommended to repeat once every 2 years as a single coat.   https://youtu.be/v2f2Yftld0Y?list=PLHIBICcWYbQ26YwuCDTCA0pmeT0f9dhQR