Construction chemistry
ELKAY GRANIT QUARTZ is a two component polyester adhesive, specifically formulated for quartz stones and other similar engineered stone surfaces.
It provides invisible joints through perfect color match with the surface and superior adhesion.
It is used for gluing, repairing and filling up porous surfaces.
Provides excellent brightness after the grinding and polishing process.
Has rapid cure time (3-5 mins at 25°C).
It is suitable for horizontal and vertical applications.
Has very low shrinkage during hardening.
It is UV resistant & non yellowing.
It does not change color, crack or shrink during hardening period.
Product usage:
Grind the surface to be glued with hard grinding paper and remove any dust, moisture and oil from the surface. The surface to be treated must be clean and completely dry.
Take required amount of stone glue and mix it with hardener paste at 2-3% of volume. Close the cap of unused part of the adhesive immediately.
In 3-5 minutes it will be set.
Usage areas:
Quartz – Composite Stone – Granit – Natural Stone – Ceramic – Similar Material
€12,10 incl VAT
ELKAY GRANIT QUARTZ is a two component polyester adhesive, specifically formulated for quartz stones and other similar engineered stone surfaces.
It provides invisible joints through perfect color match with the surface and superior adhesion.
It is used for gluing, repairing and filling up porous surfaces.
Provides excellent brightness after the grinding and polishing process.
Has rapid cure time (3-5 mins at 25°C).
It is suitable for horizontal and vertical applications.
Has very low shrinkage during hardening.
It is UV resistant & non yellowing.
It does not change color, crack or shrink during hardening period.
Product usage:
Grind the surface to be glued with hard grinding paper and remove any dust, moisture and oil from the surface. The surface to be treated must be clean and completely dry.
Take required amount of stone glue and mix it with hardener paste at 2-3% of volume. Close the cap of unused part of the adhesive immediately.
In 3-5 minutes it will be set.
Usage areas:
Quartz – Composite Stone – Granit – Natural Stone – Ceramic – Similar Material
€11,95 incl VAT
ELKAY GRANIT SINK SHOT is an ecofriendly, one-component, high quality sink adhesive with excellent adhesion and sealing properties.
It has advanced hybrid polymer technology with high initial tack.
It cures under influence of humidity and forms a durable elastic rubber.
It has a wide area of use, both indoor and outdoor.
It is permanently flexible and does not break.
Provides durable mold resistant.
No shrinkage and bubble free.
Free of isocyanates, solvents and silicones.
It is paintable.
Usage areas:
All types of Natural & Synthetic Stones – Concrete – Glass – PVC- Ceramic – Metal – Steel – Wood
Product usage:
Surfaces must be clean and free of all contaminants such as dust, dirt and oils.
Cut the tip of the cartridges according to the width of the surface and put the product into to the cartridge gun.
Apply the adhesive in strips or dots to the base or on the element to be bonded in vertical rows.
Bring together the parts to be joined as quickly as possible. Hold glued parts still until the curing finalizes.
Curing time may varies based on the temperature and relative humidity level.
€6,25 incl VAT
ELKAY GRANIT TRANSPARENT marble and stone adhesive is a two component transparent polyester adhesive for marble, travertine, granite, ceramic, brick and other similar materials.
It is used for gluing, repairing and filling up porous surfaces.
Has rapid cure time (5-7 mins at 25°C).
With its extra transparency, provides great harmony with the surface colour.
Provides excellent brightness after the grinding and polishing process.
It is suitable for horizontal and vertical applications.
No color change, cracking or shrinkage during hardening period.
Product usage:
€11,95 incl VAT
ELKAY GRANIT UNIVERSAL SILICONE SEALANT is a acetoxy cure silicone sealant for a range of sealing and glazing applications.
It provides strong adhesion.
Stays permanently elastic after curing.
Resistant to extreme temperatures, aging and discoloring.
It is suitable for common non-porous building materials.
Can be used for sealing around windows, doors; DIY applications; bathroom, kitchen and plumbing applications; Connection and expansion of joints on glass, porcelain, steel etc.
Usage areas:
Walls-Brick-Concrete-PVC-Wood-Glass-Ceramic-Mirror-Marble-Granite
Product usage:
Application surfaces must be sufficiently free of dirt, oil and dust.
Open the cartridge by cutting the top and screw on the nazzle.
Cut off the tip of nozzle. Take off the aluminum cover at the bottom of the cartridge.
Insert cartridge in gun and apply.
After the application, the sealant must be tooled with light pressure to spread the material against the joint surfaces and to obtain a professional finish.
Excess uncured sealant may be cleaned with solvent and cured sealant may be cleaned mechanically.
€5,00 incl VAT
ELKAY GRANIT COLORED Marble and Stone Adhesive is a two component polyester adhesive for marble, travertine, granite, ceramic, brick and other similar materials.
It is used for gluing, repairing and filling up porous surfaces.
Has rapid cure time (3-5 mins at 25 °C).
Provides excellent brightness after grinding and polishing process.
It is suitable for horizontal and vertical applications.
No color change, cracking or shrinkage during hardening period.
Usage areas: Natural Stone – Marble – Granit – Travertine – Ceramic – Brick – Similar Materials
Product usage:
Grind the surface to be glued with hard grinding paper and remove any dust, moisture and oil from the surface. The surface to be treated must be clean and completely dry.
Take required amount of stone glue and mix it with hardener paste at 2-3% of volume. Close the cap of unused part of the adhesive immediately.
In 3-5 minutes it will be set..
€8,00 incl VAT
ELKAY MAXIBLACK is a black colored solvent based color enhancing sealer with oil and water repellent agents.
It enhances the colors of the darks stones even darker.
It creates an invisible barrier on the applied surface while allowing surface to breathe.
It hampers the absorption of common watery and oily stains.
It provides easy cleaning and facilitates daily maintenance.
Thanks to its high UV resistance, it prevents color fading caused by the sun on the surface.
It eliminates superficial hairline cracks.
It protects the surface against moss, mold and efflorescence.
Usage areas:
Natural Stone – Brick – Terracotta – Tile Mosaic – Cement Based Surfaces
Product usage:
Elkay MAXIBLACK is a “ready to use” sealer and steps for correct usage are as follows;
The surface on which the product will be applied must be dry and free of any absorbant varnish.
Apply 1 coat of the product liberally to the surface with a brush or roller.
Wait for the stone to absorb.
After the product is well absorbed by the stone, apply the second coat.
After applying the second coar, rub the material onto the stone with the help of dry clean cloth, so that the material does not leave any stain on the surface.
To prolong the life of the protection, it is highly recommended to repeat once every 2 years as a single coat.
€43,65 incl VAT
ELKAY MAXICLEAN is a natural stone cleaner for removing greasy and stubborn stains from all rigid surfaces.
It removes construction residues, stubburn dirts and water based waxes on acid-sensitive stones.
It cleans surface without damage.
It enables the removal of construction residues and water-based polishes from acid-sensitive natural stones without damaging the surface.
If diluted, It’s excellent for basic daily cleaning of surfaces like ceramic, porcelain, natural stone, PVC, parquet, laminate and metal.
Product usage:
Elkay MAXICLEAN is a “ready to use” heavy duty cleaner and steps for correct usage are as follows;
Pour 50 ml of Elkay MAXICLEAN into half bucket of water (5lt) and wipe.
For stubborn stains; pour MAXICLEAN directly on the stain and wait for MAXICLEAN to penetrate into the dirt.
Clean the surface with cloth or wipe up.
Usage areas:
Natural Stone – Ceramic – Glass – Metal – Porcelain – Concrete – Parquet – PVC
€11,65 incl VAT
ELKAY MAXICOLOR is a solvent based color enhancing sealer with oil and water repellent agents.
It enhances the color of the stone.
It creates an invisible barrier on the applied surface while allowing surface to breathe.
It hampers the absorption of common watery and oily stains.
It provides easy cleaning and facilitates daily maintenance.
Thanks to its high UV resistance, it prevents color fading caused by the sun on the surface.
It eliminates superficial hairline cracks.
Usage areas:
Natural Stone – Brick – Terracotta – Tile Mosaic – Cement Based Surfaces
Product usage:
Elkay MAXICOLOR is a “ready to use” sealer and steps for correct usage are as follows;
The surface on which the product will be applied must be dry and free of any absorbant varnish.
Apply 1 coat of the product liberally to the surface with a brush or roller.
Wait for the stone to absorb.
After the product is well absorbed by the stone, apply the second coat.
After applying the second coat,, rub the material onto the stone with the help of dry clean cloth, so that the material does not leave any stain on the surface.
To prolong the life of the protection, it is highly recommended to repeat once every 2 years as a single coat.
€43,65 incl VAT
ELKAY MAXIMAX NANO is a solvent based universal polish for natural and synthetic stones.
It enhances the color of the surface and gives a perfect natural gloss.
It provides easy cleaning without any use of detergent.
It provides long lasting protection via its water & oil repellent nano technology and protects the surface against oil, lime and water based-stains.
To prolong the life of protection and preserve the shiny look, it is highly recommended to reapply MAXIMAX NANO every month.
Product usage:
Elkay MAXIMAX NANO is a “ready to use” polish and steps for correct usage are as follows;
Before applying the product, make sure the surface on which the product will be applied is dry.
Apply the polish evenly to the surface with a clean & soft cloth or brush.
Repeat the process until desired cleanliness and brightness is achieved on the applied surface.
Usage areas:
Granite – Marble – Natural and Synthetic Stones – Metal and Stainless Steel Surfaces
€28,65 incl VAT
ELKAY MAXIMAX is a solvent based universal polish for natural and synthetic stones.
It gives a perfect natural gloss.
It revitalizes the shine of polished finishes.
It is ideal for maintenance.
It does not stratify during application.
It does not does not damage synthetic surfaces.
It protects surfaces from abrasion if used regularly.
Weekly usage is highly recommended for ultimate gloss.
Product usage:
Elkay MAXIMAX is a “ready to use” polish and steps for correct usage are as follows;
Before applying the product, make sure the surface on which the product will be applied is dry.
Apply the polish evenly to the surface with clean & soft cloth.
Repeat the process until desired cleanliness and brightness is achieved on the applied surface.
Usage areas:
Granite – Marble – Natural and Synthetic Stones – Metal and Stainless Steel Surfaces
€24,90 incl VAT
ELKAY MAXISEAL is a solvent based natural look deep penetrating sealer with oil and water repellent agents.
It does not alter original colour and appearance.
It creates an invisible barrier on the applied surface while allowing the surface to breathe.
It hampers the absorption of common watery and oily stains.
It provides easy cleaning and facilitates daily maintenance.
Offers long lasting, renewable protection.
Thanks to its high UV resistance, it prevents color fading caused and yellowing.
It protects the surface against moss, mold and efflorescence.
Usage areas:
Natural Stone – Brick – Terracotta – Tile – Mosaic – Cement Based Surfaces
Product usage:
Elkay MAXISEAL is a “ready to use” sealer and steps for correct usage are as follows;
The surface on which the product will be applied must be dry and free of any absorbant varnish.
Apply 1 coat of the product liberally to the surface with a brush or roller.
Wait for the stone to absorb.
After the product is well absorbed by the stone, apply the second coat.
Rub the material on the stone with the help of dry clean cloth, so that the material does not leave any stain on the surface.
To prolong the life of the protection, it is highly recommended to repeat once every 2 years as a single coat.
€46,90 incl VAT