epoGRANIT 1-1 RATIO EPOXY ADHESIVE EG2001, 500g+500g

ELKAY epoGRANIT 1:1 RATIO is a a multi-purpose, epoxy based, non-sag paste form, beige color, structural adhesive with 1:1mixing ratio.

Suitable for bonding, filling, repairing, reinforcing applications and metal anchorage installations that requires high bonding strength and bearing capacity.

Can be used to install grouting bolts and metal into concrete and masonry based materials.

Usable for grouting horizontal cracks in structural concrete and wood by gravity feed.

It is easy to use.

Non-sag on vertical or overhead surface.

It has excellent chemical resistance.

Can be used for building reinforcement in earthquake areas.

Usage areas: 

Granit – Marble – Natural Stones – Quartz Solid Surface – Composite Materials – Bricks – Ceramics – Metal –  Sintered Porcelaine

Product usage: 

Grind the surface to be glued with hard grinding paper and remove any dust, moisture and oil from the surface. The surface to be treated must be clean and completely dry.

Take required amount of stone glue (A) and mix it with hardener paste (B) until a homogeneous shade of color is achieved with 1A:1B mixing ratio . Close the cap of  unused part of the adhesive immediately.

In 45-55 minutes it will be set. Hardening process is accelerated by heat and delayed by cold.